While lampless projectors are not brand new, the technology has evolved and continues to improve as time goes on. Imagine an installation grade projector that can run 24/7 with virtually no maintenance and no lamp changes and carry a three year warranty. Imagine not waiting for your projector to warm up or cool down, where the projector will reach maximum brightness and turn off almost immediately. Combine this with advanced features like projection mapping, edge blending, and an HDBaseT input packaged in a bright enough projector for large venues and you have quite a value proposition for your clients.
Laser projectors offer several benefits over traditional lamp based technologies. Let me clarify that laser simply refers to the light source, so the projection technologies like 3LCD are still a major part of these new projectors. Traditional lamp based projectors require the lamp to be replaced roughly every 1500 to 6000 hours depending upon the projector and the mode you run it in, while the average lifespan of a laser based projector is 20,000 hours.
Additionally, with most traditional lamp based projectors it takes a few minutes for the projector to warm up after powering on, and can take up to thirty minutes to provide a stable brightness level and often need to remain plugged in after powering off in order to properly cool the lamp. With laser based projectors they are ready to go almost immediately after being powered on and do not require a connected power source upon powering off with no worry of damaging the projector’s light source.
As far as the light source, projector lamps lose most of their brightness in the first half of their lifecycle whereas with a laser based light source the brightness loss is linear over the 20,000 hour lifecycle. What does this mean? This means that if you compare a laser based projector with a lamp based projector, both with the same light output rating (lumens) that within a very short period of time the laser projector will have the brighter image. Furthermore, even lamp based projectors with higher light output ratings than a laser based projector will quickly provide a lower light output than the laser projector due to the steep curve in degradation of the lamps brightness.
Epson’s popular Pro G and Pro Z installation grade projectors will soon be joined by the new Pro L series of laser based projectors with multiple choices ranging in brightness from 6,000 lumens to 12,000 lumens and multiple lens options with all of the features that users of the Pro G and Pro Z models have grown to love. Expect to start seeing these shipping in June of 2016. I know I can’t wait to get my hands on one.
For more information on Epson Projectors contact Brian Rhatigan at firstname.lastname@example.org or 888.420.2566 x6546